Encamên Lêgerînê

AGS-TECH, Inc. is globally recognized for its wide range of engineering integration, mechanical & optical & electronic & software integration capabilities. Yekbûna Endezyariyê - Yekbûna Mekanîk & Optîkî & Elektronîk & Nermalava Em ne tenê pêkhateyên takekesî çêdikin. Em di heman demê de INTEGRATION ENDEZZERÎ - Yekbûna Mekanîk & Optîkî & Elektronîkî û Nermalavê, Civîn û Testkirin peyda dikin. Bi gotinek din, em dikarin hêman û perçeyên we çêkin û dikarin wan binecivînin an jî wan di hilberên bêkêmasî de bicivînin. Digel vê yekê em dikarin hardware bi nermalavê û firmware re yek bikin, ceribandin û kalîteyê li ser hilberên we bikin, em dikarin wekî ku amade ne ku ji xerîdarên xwe re bifroşin etîket bikin, pakkirin û bişînin. Cûreyên karûbarên entegrasyonê yên endezyariyê ku em bi salan e ku ji xerîdarên xwe re pêşkêş dikin ev in: - Yekbûn û komkirina endezyarî ya pêkhateyên mekanîkî yên ji metal, alloy, plastîk û elastomer (lasoman) hatine çêkirin. Nimûneyên hilberên ku me hilberandine meclîsên pêlav, hilgir û kelûpelan, çîp û alavên ku ji hêla me ve ji bo serîlêdanên taybetî têne çêkirin in. - Yekbûn û komkirina endezyarî ya pêkhateyên elektrîkî û elektronîkî yên wekî panelên çerxa çapkirî, meclîsên têl û kabloyan, çîpên germê, xanî û pakêta hilberê. Mînakên tîpîk dabînkirina hêzê ne ku me ji bo xerîdarên xwe çêdikir. - Yekbûn û berhevkirina endezyariya pêkhateyên optîkî bi pêkhateyên mekanîkî, elektrîkî û elektronîkî. Mînakên tîpîk cîhazên hestiyar ên optîkî, amûrên ceribandina optîkî ne. - Yekbûna endezyarî ya hardware optîk, elektronîkî û mekanîkî bi nermalavê re. Robotên cihêreng û pergalên xweseriyê yên ku me ji bo xerîdarên xwe çêkirine ji vê komê re mînak in. Em dikarin kodê binivîsin û pergalên weya bicîbûyî, robot û alavên otomasyonê bername bikin an heke we kodek nivîsandî hebe, em dikarin wê bi pergala weya nû re yek bikin, xelet bikin, biguhezînin û koda we hîn çêtir bikin. Ji bo hin projeyan, me bi serfirazî nermalava ji-raftê an kodek belaş berdest di nav pergalên xerîdarên xwe de yek kiriye. Ji bo BERNAMEYA HEVKARÎYA DESIGN a me broşurê dakêşin Heke hûn bi piranî li şûna kapasîteyên çêkirinê bi kapasîteyên me yên endezyar û lêkolîn û pêşkeftinê re eleqedar in, wê hingê em we vedixwînin ku hûn biçin serdana malpera meya endezyariyê http://www.ags-engineering.com CLICK Product Finder-Locator Service RÛPERA BERÊ

Camera Systems - Components - Optic Scanner - Optical Readers - Imaging System - CCD - Optomechanical Systems - IR Cameras Hilberîn & Civîna Pergalên Kamera Xweserkirî AGS-TECH offers: • Camera systems, camera components and custom camera assemblies • Custom designed and manufactured optical scanners, readers, optical security product assemblies. • Precision optical, opto-mechanical and electro-optical assemblies integrating imaging and nonimaging optics, LED lighting, fiber optics and CCD cameras • Among the products our optical engineers have developed are: - Omni-directional periscope and camera for surveillance and security applications. 360 x 60º field of view high resolution image, no stitching required. - Inner cavity wide angle video camera - Super slim 0.6 mm diameter flexible video endoscope. All medical video couplers fit over standard endoscope eyepieces and are completely sealed and soakable. For our medical endoscope and camera systems, please visit: http://www.agsmedical.com - Video camera and coupler for semi-rigid endoscope - Eye-Q Videoprobe. Non-contact zoom videoprobe for coordinate measuring machines. - Optical spectrograph & IR imaging system (OSIRIS) for ODIN satellite. Our engineers worked on the flight unit assembly, alignment, integration and test. - Wind imaging interferometer (WINDII) for NASA upper atmosphere research satellite (UARS). Our engineers worked on consulting on assembly, integration and test. WINDII performance and operational lifetime far exceeded the design goals and requirements. Depending on your application, we will determine what dimensions, pixel count, resolution, wavelength sensitivity your camera application requires. We can build systems for you suitable for infrared, visible and other wavelengths. Contact us today to find out more. Dowload brochure for our DESIGN PARTNERSHIP PROGRAM Developing a customized camera system can take relatively longer lead times and cost more as compared to ready-to-use systems. Therefore please click on the blue links below to check whether any of our ready-to-use products fit your application: Barcode and Fixed Mount Scanners - RFID Products - Mobile Computers - Micro Kiosks OEM Technology (We private label these with your brand name and logo if you wish) Barcode Scanners (We private label these with your brand name and logo if you wish) Fixed Industrial Scanners (We private label these with your brand name and logo if you wish) Hikrobot Machine Vision Products Hikrobot Smart Machine Vision Products Hikrobot Machine Vision Standard Products Hikvision Logistic Vision Solutions Private Label Medical Endoscopes and Visualization Systems (We can put your company name and logo on these) Also make sure to download our comprehensive electric & electronic components catalog for off-shelf products by CLICKING HERE. CLICK Product Finder-Locator Service RÛPERA BERÊ

Computer Storage Devices - Disk Array - NAS Array - Storage Area Network - SAN - Utility Storage Arrays - AGS-TECH Inc. Amûrên hilanînê, Rêzikên Dîskê û Pergalên hilanînê, SAN, NAS DAVÊN BERXWEDAN an jî wekî STORAGE MEDIUM tê zanîn, her hardware ya hesabker e ku ji bo hilanîn, barkirin û derxistina pel û tiştan tê bikar anîn. Amûrên hilanînê dikarin agahdarî bi demkî û hem jî bi domdarî hilînin û hilînin. Ew dikarin ji komputerek, ji serverek an ji cîhazek hesabkerek wekhev re hundur an derveyî bin. Our focus is on DISK ARRAY which is a hardware element that contains a large group of hard disk drives (HDDs). Disk arrrays may contain several disk drive trays and have architectures improving speed and increasing data protection. A storage controller runs the system, which coordinates activity within the unit. Disk arrays are the backbone of modern storage networking environments. A disk array is a DISK STORAGE SYSTEM which contains multiple disk drives and is differentiated from a disk enclosure, in that an array has cache memory and advanced functionality such as RAID and virtualization. RAID stands for Redundant Array of Inexpensive (or Independent) Disks and employs two or more drives to improve performance and fault tolerance. RAID enables the storage of data in multiple places to protect the data against corruption and to serve it to users faster. Click on the blue highlighted text to download catalogs and brochures: Private Label Flash Storage for Embedded Industrial Applications (We can put your name, logo, brand on these.........) To choose a suitable Industrial Grade Storage Device for your project, please go to our industrial computer store by CLICKING HERE. Dowload brochure for our DESIGN PARTNERSHIP PROGRAM Components of a typical disk array include: - Disk array controllers - Cache memories - Disk enclosures - Power supplies Generally disk arrays provide increased availability, resiliency and maintainability by using additional, redundant components such as controllers, power supplies, fans, etc., to the degree that all single points of failure are eliminated from the design. These components are most of the time hot-swappable. Typically, disk arrays are divided into categories: NETWORK ATTACHED STORAGE (NAS) ARRAYS : NAS is a dedicated file storage device that provides local-area network (LAN) users with centralized, consolidated disk storage through a standard Ethernet connection. Each NAS device is connected to the LAN as an independent network device and assigned an IP address. Its main advantage is that network storage is not limited to the storage capacity of a computing device or the number of disks in a local server. NAS products can generally hold enough disks to support RAID, and multiple NAS appliances can be attached to the network for storage expansion. STORAGE AREA NETWORK (SAN) ARRAYS : They contain one or more disk arrays that function as the repository for the data which is moved in and out of the SAN. Storage arrays connect to the fabric layer with cables running from the devices in the fabric layer to the GBICs in the ports on the array. There are mainly two types of storage area network arrays, namely modular SAN arrays and monolithic SAN arrays. Both of them use built-in computer memory to speed up and cache access to slow disk drives. The two types use memory cache differently. Monolithic arrays generally have more cache memory compared to modular arrays. 1.) MODULAR SAN ARRAYS : These have fewer port connections, they store less data and connect to fewer servers compared to monolithic SAN arrays. They make it possible for the user such as small companies to start small with a few disk drives and to increase the number as storage needs grow. They have shelves for holding disk drives. If connected to only a few servers, modular SAN arrays can be very fast and offer companies a flexibility. Modular SAN arrays fit into standard 19” racks. They generally use two controllers with separate cache memory in each and mirror the cache between the controllers to prevent data loss. 2.) MONOLITHIC SAN ARRAYS : These are big collections of disk drives in data centers. They can store much more data compared to modular SAN arrays and generally connect to mainframes. Monolithic SAN arrays have many controllers that can share direct access to fast global memory cache. Monolithic arrays generally have more physical ports to connect to storage area networks. Thus more servers can use the array. Typically monolithic arrays are more valuable and have superior built-in redundancy and reliability. UTILITY STORAGE ARRAYS : In utility storage service model, a provider offers storage capacity to individuals or organizations on a pay-per-use basis. This service model is also referred to as storage on demand. This facilitates efficient use of resources and reduces cost. This can be more cost effective to companies by eliminating the need to purchase, manage and maintain infrastructures that meet peak requirements which may be beyond the needed capacity limits. STORAGE VIRTUALIZATION : This uses virtualization to enable better functionality and more advanced features in computer data storage systems. Storage virtualization is the apparent pooling of data from several same-type or different types of storage devices into what appears to be a single device managed from a central console. It helps storage administrators perform backup, archiving and recovery more easily and faster by overcoming the complexity of a storage area network (SAN). This can be achieved by implementing virtualization with software applications or using hardware and software hybrid appliances. CLICK Product Finder-Locator Service RÛPERA BERÊ

AGS-TECH Inc Customer References - We have many loyal customers satisfied with our global custom manufacturing & engineering integration services Çavkaniyên Mişterî AGS-TECH, Inc. Nêzîkî du dehsalan ji xerîdarên navxweyî û navneteweyî re xizmet dike. Gelek xerîdarên me ji gelek salan ve ji me re operasyonên çêkirinê, pêkhate, parçe, meclîs û hilberên qedandî ji me derdixin. Ji bo referansên xerîdar bi me re têkilî daynin. Ji kerema xwe LI vir bikirtînin JI BO BIXWÎNE BİXWÎNE BİXWÎNE Û BİXWÎNE JI HIN MESERÊN ME RÛPERA BERÊ

Optomechanical Components & Assemblies, Beam Expander, Interferometers, Polarizers, Prism and Cube Assembly, Medical & Industrial Video Coupler, Optic Mounts Meclîsên Optomekanîkî yên Xweserkirî AGS-TECH is a supplier of: • Custom optomechanical assemblies like beam expander, beamsplitter, interferometry, etalon, filter, isolator, polarizer, prism and cube assembly, optical mounts, telescope, binocular, metallurgical microscope, digital camera adapters for microscope and telescope, medical and industrial video couplers, special custom designed illumination systems. Among the optomechanical products our engineers have developed are: - A portable metallurgical microscope which can be set as upright or inverted. - A gravure inspection microscope. - Digital camera adapters for microscope and telescope. Standard adapters fit all popular digital camera models and can be customized if required. - Medical and industrial video couplers. All medical video couplers fit over standard endoscope eyepieces and are completely sealed and soakable. - Night vision goggles - Automotive mirrors Automotive Mirrors Brochure (Click on the left blue link to download) Optical Components Brochure (Click on the left blue link to download) - in this you can find our free space optical components and subassemblies we use when we design and manufacture optomechanical assembly for special applications. We combine and assemble these optical components with precision machined metal parts to build our customers optomechanical products. We use special bonding and attachment techniques and materials for rigid, reliable and long life assembly. In some cases we deploy ''optical contacting'' technique where we bring extremely flat and clean surfaces together and join them without using any glues or epoxies. Our optomechanical assemblies are sometimes passively assembled and sometimes active assembly takes place where we use lasers and detectors to make sure the parts are properly aligned prior to fixing them in place. Even under extensive environmental cycling in special chambers such as high temperature/low temperature; high humidity/low humidity chambers, our assemblies remain intact and keep working. All our raw materials for optomechanical assembly are procured from World famous sources such as Corning and Schott. Private Label Medical Endoscopes and Visualization Systems (We can put your company name and logo on these) CLICK Product Finder-Locator Service RÛPERA BERÊ

Manufacturing and Assembly of Simple Machines, Lever Assembly, Wheel and Axle, Pulley, Pulley System, Hoist, Inclined Plane, Wedge, Screws from AGS-TECH Inc. Simple Machines Meclîsa CLICK Product Finder-Locator Service RÛPERA BERÊ

Waterjet Machining - WJ Cutting - Abrasive Water Jet - Hydrodynamic Machining - WJM - AWJM - AJM - AGS-TECH Inc. - USA Makînekirina Waterjet & Abrasive Waterjet & Abrasive-Jet Machining and Cutting The principle of operation of WATER-JET, ABRASIVE WATER-JET and ABRASIVE-JET MACHINING & CUTTING is based on momentum change of the fast flowing stream that hits the workpiece. During this momentum change, a strong force acts and cuts the workpiece. These WATERJET CUTTING & MACHINING (WJM) techniques are based on water and highly refined abrasives, propelled at three times the speed of sound, to make incredibly accurate and precise cuts in virtually any material. For some materials like leather and plastics, an abrasive may be omitted and cutting can be done only with water. Waterjet machining can do things that other techniques cannot, from cutting intricate, very thin details in stone, glass and metals; to rapid hole drilling of titanium. Our waterjet cutting machines can handle large flat stock material with many feet of dimensions with no limit to the type of material. To make cuts and manufacture parts, we can scan images from files into the computer or a Computer Aided Drawing (CAD) of your project can be prepared by our engineers. We need to determine the type of material being cut, its thickness, and the desired cut quality. Intricate designs present no problem as the nozzle simply follows the rendered image pattern. Designs are limited only by your imagination. Contact us today with your project and let us give you our suggestions and quote. Let us examine these three types of processes in detail. WATER-JET MACHINING (WJM): The process may equally be called HYDRODYNAMIC MACHINING. The highly localized forces from the water-jet are used for cutting and deburring operations. In simpler words, the water jet acts like a saw that cuts a narrow and smooth groove in the material. Pressures levels in waterjet-machining are around 400 MPa which is pretty sufficient for efficient operation. If needed, pressures that are a few times this value can be generated. The diameters of jet nozzles are in the neighborhood of 0.05 to 1mm. We cut a variety of nonmetallic materials such as fabrics, plastics, rubber, leather, insulating materials, paper, composite materials using the waterjet cutters. Even complicated shapes such as automotive dashboard coverings made of vinyl and foam can be cut using multiple-axis, CNC controlled waterjet machining equipment. Waterjet machining is an efficient and clean process when compared to other cutting processes. Some of the major advantages of this technique are: -Cuts can be started at any location on the work piece without the need to predrill holes. -No significant heat is produced -The waterjet machining and cutting process is well suited for flexible materials because no deflection and bending of the workpiece takes place. -The burrs produced are minimal -Water-jet cutting and machining is an environmentally friendly and safe process that uses water. ABRASIVE WATER-JET MACHINING (AWJM): In this process, abrasive particles such as silicon carbide or aluminum oxide are contained in the water jet. This increases the material removal rate over that of purely water-jet machining. Metallic, nonmetallic, composite materials and others can be cut using AWJM. The technique is particularly useful for us in cutting heat-sensitive materials that we cannot cut using other techniques that produce heat. We can produce minimum holes of 3mm size and maximum depths of about 25 mm. Cutting speed can reach as high as several meters per minute depending on material being machined. For metals the cutting speed in AWJM is less as compared to plastics. Using our multiple-axis robotic control machines we can machine complex three-dimensional parts to finish dimensions without the need for a second process. To keep nozzle dimensions and diameter constant we use sapphire nozzles which is important in keeping accuracy and repeatability of the cutting operations. ABRASIVE-JET MACHINING (AJM) : In this process a high-velocity jet of dry air, nitrogen or carbondioxide containing abrasive particles hits and cuts the workpiece under controlled conditions. Abrasive-Jet Machining is used for cutting small holes, slots and intricate patterns in very hard and brittle metallic and nonmetallic materials, deburring and removing flash from parts, trimming and beveling, removing surface films such as oxides, cleaning of components with irregular surfaces. The gas pressures are around 850 kPa, and the abrasive-jet velocities around 300 m/s. Abrasive particles have diameters around 10 to 50 microns. The high speed abrasive particles round off sharp corners and holes made tend to be tapered. Therefore designers of parts that will be machined by abrasive-jet should take these into consideration and make sure the produced parts do not require such sharp corners and holes. The water-jet, abrasive water-jet and abrasive-jet machining processes can be used effectively for cutting and deburring operations. These techniques have an inherent flexibility thanks to the fact that they do not use hard tooling. CLICK Product Finder-Locator Service RÛPERA BERÊ

Rubber and Elastomer Molds & Molding, Rubber Injection Molding, Rubber Toy Manufacturing Çûçik û Elastomer Molds & Molding Parçeyek bi derzîlêdana gomê ku bi parçeyên din ên metal ve hatî berhev kirin. Em qalib û amûran çêdikin da ku parçeyên xwerû yên we hilberînin. Civîna mekanîkî ya bi hêmanek çêkirî ya derzîlêdana gomê. Tevahiya meclîsê ji hêla AGS-TECH Inc ve hatî çêkirin. Lîstikên gomî yên ku ji hêla AGS-TECH Inc. Parçeyên xwerû ji cûrbecûr materyalên gomî hatine çêkirin Ji bo Yek ji Xerîdarên Me Mêjûwa Gomûka Xwerû ya Matên Otomotîvê - AGS-TECH Inc - Serdana me bikin www.agstech.net Parçeyên gomî yên çêkirî yên ku di nav tiştên werzîşê de têne berhev kirin. Hemî pêkhateyên ku ji hêla AGS-TECH Inc. ve hatî çêkirin û berhev kirin. Hilberîna kemberên gomî ji hêla AGS-TECH Inc. Hilberîna O-Ring li AGS-TECH Inc. Kits O-Ring Molded Parçeyên gomê yên jêkirî ji EPDM - NBR - CR - SILÎKON - PVC - TPE - TPV Derxistina gomê ji EPDM - NBR - CR - SILICONE - PVC - TPE - TPV ji hêla AGS-TECH ve hatî çêkirin Extrusion ji EPDM - NBR - CR - SILICONE - PVC - TPE - TPV Parçeyên gomê yên çêkirî yên ji EPDM - NBR - CR - SILÎKON - PVC - TPE - TPV Lastîka derbirkirî ku ji EPDM - NBR - CR - SILÎKON - PVC - TPE - TPV hatî çêkirin RÛPERA BERÊ

Microwave Components - Subassembly - Microwave Circuits - RF Transformer - LNA - Mixer - Fixed Attenuator - AGS-TECH Pêkhateyên Mîkropêl û Pergalên Hilberîn & Civîn We manufacture and supply: Microwave electronics including silicon microwave diodes, dot touch diodes, schottky diodes, PIN diodes, varactor diodes, step recovery diodes, microwave integrated circuits, splitters/combiners, mixers, directional couplers, detectors, I/Q modulators, filters, fixed attenuators, RF transformers, simulation phase shifters, LNA, PA, switches, attenuators, and limiters. We also custom manufacture microwave subassemblies and assemblies according to users' requirements. Please download our microwave components and systems brochures from the links below: Antenna Brochure for 5G - LTE 4G - LPWA 3G - 2G - GPS - GNSS - WLAN - BT - Combo - ISM Barcode and Fixed Mount Scanners - RFID Products - Mobile Computers - Micro Kiosks OEM Technology (We private label these with your brand name and logo if you wish) Barcode Scanners (We private label these with your brand name and logo if you wish) Microwave Flexible Cable Assembly Microwave and Milimeter Wave Test Accessories Brochure (Cable assemblies, VNA Test Assemblies, Mechanical Calibration Kits, RF Coaxial Adapters, Test Port Adapters, DC Blocks, NMD Connectors....etc.) Microwave Waveguides - Coaxial Components - Milimeterwave Antennas (Straight Waveguide, Waveguide Bend, Waveguide to Coaxial Adapter, Directional Couplers, Waveguide Tee, Circulators, Isolators......etc.) Printers for Barcode Scanners and Mobile Computers (We private label these with your brand name and logo if you wish) RF and Microwave Components (Broadband 90/180 Degree Hybrid and Coupler, Broadband Power Divider, Filter, RF switch, Broadband Amplifier, Broadband Frequency Synthesizer) RFID Readers - Scanners - Encoders - Printers (We private label these with your brand name and logo if you wish) Soft Ferrites - Cores - Toroids - EMI Suppression Products - RFID Transponders and Accessories Brochure Dowload brochure for our DESIGN PARTNERSHIP PROGRAM Microwaves are electromagnetic waves with wavelengths ranging from 1 mm to 1 m, or frequencies between 0.3 GHz and 300 GHz.The microwave range includes ultra-high frequency (UHF) (0.3–3 GHz), super high frequency (SHF) (3–30 GHz), and extremely high frequency (EHF) (30–300 GHz) signals. Uses of microwave technology: COMMUNICATION SYSTEMS: Before the invention of fiber optic transmission technology, most long distance telephone calls were carried via microwave point-to-point links through sites like the AT&T Long Lines. Starting in the early 1950s, frequency division multiplexing was used to send up to 5,400 telephone channels on each microwave radio channel, with as many as ten radio channels combined into one antenna for the hop to the next site, that was up to 70 km away. Wireless LAN protocols, such as Bluetooth and the IEEE 802.11 specifications, also use microwaves in the 2.4 GHz ISM band, although 802.11a uses ISM band and U-NII frequencies in the 5 GHz range. Licensed long-range (up to about 25 km) Wireless Internet Access services can be found in many countries in the 3.5–4.0 GHz range (not in the USA however). Metropolitan Area Networks: MAN protocols, such as WiMAX (Worldwide Interoperability for Microwave Access) based in the IEEE 802.16 specification. The IEEE 802.16 specification was designed to operate between 2 to 11 GHz frequencies. The commercial implementations are in the 2.3GHz, 2.5 GHz, 3.5 GHz and 5.8 GHz frequency ranges. Wide Area Mobile Broadband Wireless Access: MBWA protocols based on standards specifications such as IEEE 802.20 or ATIS/ANSI HC-SDMA (e.g. iBurst) are designed to operate between 1.6 and 2.3 GHz to give mobility and in-building penetration characteristics similar to mobile phones but with much much greater spectral efficiency. Some of the lower microwave frequency spectrum is used on Cable TV and Internet access on coaxial cable as well as broadcast television. Also some mobile phone networks, like GSM, also use lower microwave frequencies. Microwave radio is used in broadcasting and telecommunication transmissions because, due to their short wavelength, highly directive antennas are smaller and therefore more practical than they would be at lower frequencies (longer wavelengths). There is also more bandwidth in the microwave spectrum than in the rest of the radio spectrum; the usable bandwidth below 300 MHz is less than 300 MHz while many GHz can be used above 300 MHz. Typically, microwaves are used in television news to transmit a signal from a remote location to a television station in a specially equipped van. The C, X, Ka, or Ku Bands of the microwave spectrum are used in the operation of most satellite communications systems. These frequencies allow large bandwidth while avoiding the crowded UHF frequencies and staying below the atmospheric absorption of EHF frequencies. Satellite TV either operates in the C band for the traditional large dish Fixed Satellite Service or Ku band for Direct Broadcast Satellite. Military communication systems run primarily over X or Ku Band links, with Ka band being used for Milstar. REMOTE SENSING: Radars use microwave frequency radiation to detect the range, speed, and other characteristics of remote objects. Radars are widely used for applications including air traffic control, navigation of ships, and traffic speed limit control. Besides ultrasonic decices, sometimes Gunn diode oscillators and waveguides are used as motion detectors for automatic door openers. Much of radio astronomy uses microwave technology. NAVIGATION SYSTEMS: Global Navigation Satellite Systems (GNSS) including the American Global Positioning System (GPS), the Chinese Beidou and the Russian GLONASS broadcast navigational signals in various bands between about 1.2 GHz and 1.6 GHz. POWER: A microwave oven passes (non-ionizing) microwave radiation (at a frequency near 2.45 GHz) through food, causing dielectric heating by absorption of energy in the water, fats and sugar contained in the food. Microwave ovens became common following development of inexpensive cavity magnetrons. Microwave heating is widely used in industrial processes for drying and curing products. Many semiconductor processing techniques use microwaves to generate plasma for purposes such as reactive ion etching (RIE) and plasma-enhanced chemical vapor deposition (PECVD). Microwaves can be used to transmit power over long distances. NASA worked in the 1970s and early 1980s to research the possibilities of using Solar Power Satellite (SPS) systems with large solar arrays that would beam power down to the Earth's surface via microwaves. Some light weaponry uses millimeter waves to heat a thin layer of human skin to an intolerable temperature to make the targeted person move away. A two-second burst of the 95 GHz focused beam heats the skin to a temperature of 130 °F (54 °C) at a depth of 1/64th of an inch (0.4 mm). The United States Air Force and Marines use this type of Active Denial System. If your interest is in engineering and research & development, please visit our engineering site http://www.ags-engineering.com CLICK Product Finder-Locator Service RÛPERA BERÊ

Compressors, Pumps, Motors for Pneumatic & Hydraulic & Vacuum Applications, Compressor, Pump, Positive Type Displacement Compressors - AGS-TECH Inc. Compressors & Pumps & Motors We offer off-the-shelf and custom manufactured COMPRESSORS, PUMPS and MOTORS for PNEUMATIC, HYDRAULIC and VACUUM APPLICATIONS. You can choose the products you need in our downloadable brochures or if you are unsure, you may describe us your needs and applications and we can offer you the suitable compressors, pumps and pneumatic & hydraulic motors. For some of our compressors, pumps and motors we are capable of making modifications and custom manufacture them to your applications. PNEUMATIC COMPRESSORS: Also called gas compressors, these are mechanical devices that increase the pressure of a gas by reducing its volume. Compressors supply air to a pneumatic system. An air compressor is a specific type of gas compressor. Compressors are similar to pumps, they both increase the pressure on a fluid and can transport the fluid through a pipe. Since gases are compressible, the compressor also reduces the volume of a gas. Liquids are relatively incompressible; while some can be compressed. The main action of a pump is to pressurize and transport liquids. Both piston and rotary screw version pneumatic compressors are available in many versions and suitable for any production activity. Mobile compressors, low- or high-pressure compressors, on-frame / vessel-mounted compressors: They are designed to meet intermittent compressed air demands. Our belt driven compressors are designed to deliver more air and higher pressures to increase the number of possible applications. Some of our belt driven two stage piston compressors have pre-installed and tank-mounted dryers. The silent range of pneumatic compressors are especially attractive for applications in closed areas or when many units need to be used. The small and compact yet powerful screw compressors are also among our popular products. The rotors of our pneumatic compressors are mounted on high quality low wear bearings. Pneumatic Variable Speed (CPVS) compressors allow users to save operating costs when the application does not require the compressors full capacity. Air-cooled compressors are designed for heavy duty installations and harsh conditions. Compressors can be categorized as: - Positive Type Displacement Compressors: These compressors operate by opening up a cavity to draw in air, and then make the cavity smaller to expel compressed air. Three designs of positive displacement compressors are common in industry: First one are the Reciprocating Compressors (single stage and two stage). As the crankshaft rotates, it causes the piston to reciprocate, alternately drawing in atmospheric air and pushing out compressed air. Piston compressors are popular in small and medium commercial applications. A single-stage compressor has only one piston connected to a crankshaft and can pressures up to 150 psi. On the other hand, two-stage compressors have two pistons of different sizes. The larger piston is called the first stage and the smaller one the second stage. Two-stage compressors can generate pressures higher than 150 psi. The second type are the Rotary Vane Compressors which have a rotor mounted off center to the housing. As the rotor spins, the vanes extend and retract to keep contact with the housing. At the inlet, the chambers between vanes increase in volume and create a vacuum to pull in the atmospheric air. When the chambers reach the outlet, their volume decreases. The air is compressed before being exhausted into the receiver tank. Rotary vane compressors produce up to 150 psi pressure. Lastly Rotary Screw Compressors have two shafts with the air seal-off contours that look similar to a screw. Air entering from the top on one end of the rotary screw compressors is exhausted out at the other end. At the location where the air enters the compressors, the volume of the chambers between the contours is large. As the screws turn and mesh, the volume of the chambers decreases and causes the air to be compressed before being exhausted into the receiver tank. - Non-Positive Type Displacement Compressors: These compressors operate by using an impeller to increase the velocity of the air. As the air enters into a diffuser, its pressure increases before the air goes into a receiver tank. Centrifugal compressors are an example. Multistage centrifugal compressor designs can generate high pressures by feeding the outlet air of a preceding stage to the inlet of the next stage. HYDRAULIC COMPRESSORS: Similar to pneumatic compressors, these are mechanical devices that increase the pressure of a liquid by reducing its volume. Hydraulic compressors are usually divided into four major groups: Piston Compressors, Rotary Vane Compressors, Rotary Screw Compressors and Gear Compressors. Rotary vane-models include also a cooled lubrication system, oil separator, relief valve on the air intake and automatic rotation speed valve. Rotary vane-models are the most suitable for installation on different excavators, mining and other machines. PNEUMATIC PUMPS: AGS-TECH Inc. offers a wide variety of Diaphragm Pumps and Piston Pumps for pneumatic applications. Piston pumps and Plunger Pumps are reciprocating pumps that use a plunger or piston to move media through a cylindrical chamber. The plunger or piston is actuated by a steam powered, pneumatic, hydraulic, or electric drive. Piston and plunger pumps are also called high viscosity pumps. Diaphragm pumps are positive displacement pumps in which the reciprocating piston is separated from the solution by a flexible diaphragm. This flexible membrane allows fluid movement. These pumps can handle many different types of fluids, even those with some solid material. Compressed air driven piston pumps use large area air-driven piston connected to small-area hydraulic piston, to convert compressed air into hydraulic power. Our pumps are designed to provide an economical, compact and portable source of hydraulic pressure. To size the right pump for your application contact us. HYDRAULIC PUMPS: A hydraulic pump is a mechanical source of power that converts mechanical power into hydraulic energy (i.e. flow, pressure). Hydraulic pumps are used in hydraulic drive systems. They can be hydrostatic or hydrodynamic. Hydraulic pumps generate flow with enough power to overcome pressure induced by the load at the pump outlet. Hydraulic pumps in operation create a vacuum at the pump inlet, forcing liquid from the reservoir into the inlet line to the pump and by mechanical action delivering this liquid to the pump outlet and forcing it into the hydraulic system. Hydrostatic pumps are positive displacement pumps while hydrodynamic pumps can be fixed displacement pumps, in which the displacement (flow through the pump per rotation of the pump) cannot be adjusted, or variable displacement pumps, which have a more complicated construction that allows the displacement to be adjusted. Hydrostatic pumps are of various types and work on the principle of Pascal's law. It states that the increase in pressure at one point of the enclosed liquid in equilibrium is transmitted equally to all other points of the liquid, unless the effect of gravity is neglected. A pump produces liquid movement or flow, and does not generate pressure. Pumps produce the flow necessary for the development of pressure which is a function of resistance to fluid flow in the system. As an example, the pressure of the fluid at the pump outlet is zero for a pump not connected to a system or load. On the other hand, for a pump delivering into a system, the pressure will rise only to the level necessary to overcome the resistance of the load. All pumps may be classified as either positive-displacement or non-positive-displacement. The majority of pumps used in hydraulic systems are positive-displacement. A Non-Positive-Displacement Pump produces a continuous flow. However, since it does not provide a positive internal seal against slippage, its output varies considerably as the pressure varies. Examples of non-positive-displacement pumps are centrifugal and propeller pumps. If the output port of a non-positive-displacement pump were blocked off, the pressure would rise, and output would decrease to zero. Although the pumping element would continue moving, flow would stop because of the slippage inside the pump. On the other hand, in aPositive-Displacement Pump, slippage is negligible compared to the pump's volumetric output flow. If the output port were plugged, pressure would increase instantaneously to the point that the pump's pumping elements or the pump’s case would fail, or the pump's prime mover would stall. A positive-displacement pump is one that displaces or delivers the same amount of liquid with each rotating cycle of the pumping element. Constant delivery during each cycle is possible because of the close-tolerance fit between the pumping elements and the pump case. This means, the amount of liquid that slips past the pumping element in a positive-displacement pump is minimal and negligible compared to the theoretical maximum possible delivery. In positive-displacement pumps the delivery per cycle remains almost constant, regardless of changes in pressure against which the pump is working. If fluid slippage is substantial, this means the pump is not operating properly and should be repaired or replaced. Positive-displacement pumps can be of either fixed or variable displacement type. The output of a fixed displacement pump remains constant at a given pump speed during each pumping cycle. The output of a variable displacement pump can be changed by altering the geometry of the displacement chamber. The term Hydrostatic is used for positive-displacement pumps and Hydrodynamic is used for non-positive-displacement pumps. Hydrostatic meaning that the pump converts mechanical energy to hydraulic energy with comparatively small quantity and velocity of liquid. On the other hand, in a hydrodynamic pump, liquid velocity and movement are large and output pressure depends on the velocity at which the liquid is made to flow. Here are the commercially available hydraulic pumps: - Reciprocating pumps: As the piston extends, the partial vacuum created in the pump chamber draws some liquid from the reservoir through the inlet check valve into the chamber. The partial vacuum helps seat the outlet check valve firmly. The volume of liquid drawn into the chamber is known because of the geometry of the pump case. As the piston retracts, the inlet check valve reseats, closing the valve, and the force of the piston unseats the outlet check valve, forcing liquid out of the pump and into the system. - Rotary pumps (external-gear pumps, lobe pump, screw pump, internal-gear pumps, vane pumps): In a rotary-type pump, rotary motion carries the liquid from the pump inlet to the pump outlet. Rotary pumps are usually classified according to the type of element that transmits the liquid. - Piston pumps (axial-piston pumps, inline-piston pumps, bent-axis pumps, radial-piston pumps, plunger pumps): The piston pump is a rotary unit which uses the principle of the reciprocating pump to produce fluid flow. Instead of using a single piston, these pumps have many piston-cylinder combinations. Part of the pump mechanism rotates about a drive shaft to generate the reciprocating motions, which draw fluid into each cylinder and then expels it, producing flow. Plunger pumps are somewhat similar to rotary piston pumps, in that pumping is the result of pistons reciprocating in cylinder bores. However, the cylinders are fixed in these pumps. Cylinders do not rotate around the drive shaft. Pistons may be reciprocated by a crankshaft, by eccentrics on a shaft, or by a wobble plate. VACUUM PUMPS: A vacuum pump is a device that removes gas molecules from a sealed volume in order to leave behind a partial vacuum. The mechanics of the pump design inherently dictate the pressure range at which the pump is able to operate. The vacuum industry recognizes the following pressure regimes: Coarse Vacuum: 760 - 1 Torr Rough Vacuum: 1 Torr – 10exp-3 Torr High Vacuum: 10exp-4 – 10exp-8 Torr Ultra High Vacuum: 10exp-9 – 10exp-12 Torr The transition from atmospheric pressure to the bottom of the UHV range (approx. 1 x 10exp-12 Torr) is a dynamic range of about 10exp+15 and beyond the capabilities of any single pump. Indeed, to get to any pressure below 10exp-4 Torr requires more than one pump. - Positive displacement pumps: These expand a cavity, seal, exhaust and repeat it. - Momentum transfer pumps (molecular pumps): These use high speed liquids or blades to knock gasses around. - Entrapment pumps (cryopumps): Create solids or adsorbed gases . In vacuum systems roughing pumps are used from atmospheric pressure down to rough vacuum (0.1 Pa, 1X10exp-3 Torr). Roughing pumps are necessary because turbo pumps have trouble starting from atmospheric pressure. Usually Rotary Vane Pumps are used for roughing. They may have oil or not. After roughing, if lower pressures (better vacuum) are needed, Turbomolecular Pumps are useful. Gas molecules interact with spinning blades and are preferentially forced downward. High vacuum (10exp-6 Pa) requires rotation of 20,000 to 90,000 revolutions per minute. Turbomolecular pumps generally work between 10exp-3 and 10exp-7 Torr Turbomolecular pumps are ineffective before gas is in “molecular flow”. PNEUMATIC MOTORS: Pneumatic motors, also called compressed air engines are types of motors which do mechanical work by expanding compressed air. Pneumatic motors generally convert the compressed air energy to mechanical work through either linear or rotary motion. Linear motion can come from a diaphragm or piston actuator, while rotary motion can come from either a vane type air motor, piston air motor, air turbine or gear type motor. Pneumatic motors have found widespread use in the hand-held tool industry for impact wrenches, pulse tools, screwdrivers, nut runners, drills, grinders, sanders, …etc, dentistry, medicine and a wide range of industrial applications. There are several advantages of pneumatic motors over electric tools. Pneumatic motors offer greater power density because a smaller pneumatic motor can provide the same amount of power as a larger electric motor. Pneumatic motors do not require an auxiliary speed controller which adds to their compactness, they generate less heat, and can be used in more volatile atmospheres because they do not require electric power, nor do they create sparks. They can be loaded to stop with full torque without damage. Please click on highlighted text below to download our product brochures: - Oil-Less Mini Air Compressors - YC Series Hydraulic Gear Pumps (Motors) - Medium and Medium-High Pressure Hydraulic Vane Pumps - Caterpillar Series Hydraulic Pumps - Komatsu Series Hydraulic Pumps - Vickers Series Hydraulic Vane Pumps and Motors - Vickers Series Valves - YC-Rexroth Series Variable Displacement Piston Pumps-Hydraulic Valves-Multiple Valves - Yuken Series Vane Pumps - Valves CLICK Product Finder-Locator Service RÛPERA BERÊ

AGS-TECH, Inc. is a supplier of Gear Cutting & Shaping Tools, including Gear Hobbing Cutters, Gear Hobs, Gear Shaper Cutters, Gear Shaving Cutters. We also manufacture and supply gear cutting and shaping tools according to your specific designs and customized needs. Amûrên Çêkirina Çêkirina Gear Ji kerema xwe ji bo dakêşana broşûra têkildar, li ser amûrên birrîn û şekildana kelûpelên şîn ên balkêş ên li jêr bikirtînin. Vana amûrên qutkirin û şekilkirina kelûpelên bêserûber in, lê ger bixwazin em li gorî nexşe û taybetmendiyên we jî çêdikin. Gear Hobbing Cutters (Gear Hobs) Gear Shaper Cutters Gear Shaving Cutters Biha: Bi model û hêjmara fermanê ve girêdayî ye. Bila ji me re hilbera berjewendiya we ji bo binavkirinê nas bikin. Ji ber ku em cûrbecûr amûrên birrîn û şekildana gemarê bi pîvan, sepan û materyalên cihêreng hildigirin; ne mimkûn e ku meriv wan li vir rêz bike. Heke hûn nebawer in, em ji we re teşwîq dikin ku bi me re têkilî daynin da ku em diyar bikin ka kîjan hilber ji we re çêtirîn e. Ji kerema xwe ji me re agahdar bikin: - Serlêdana te - Pola materyalê tê xwestin - Dimensions - Pêdiviyên qedandinê - Pêdiviyên pakkirinê - Pêdiviyên etîketkirinê - Hejmara her ferman û daxwaziya salane VIRÊ bikirtînin da ku kapasîteyên me yên teknîkî û rêbernameya referansê dakêşin ji bo birîna taybetmendî, sondajê, rijandin, çêkirin, şikilandin, pîvazkirina amûrên ku di bijîjkî, diranan, amûrên rast, mêtina metal, çêkirina mirinê û sepanên din ên pîşesaziyê de têne bikar anîn. CLICK Product Finder-Locator Service Li vir bikirtînin da ku biçin Menuya Amûrên Birîn, Xalkirin, Xirkirin, Lapkirin, Paqijkirin, Diçandin û Teşekirin. Ref. Kod: oicasxingwanggongju

Industrial Workstations - Industrial Computer - Micro Computers - AGS-TECH Inc. - NM - USA Qereqolên Pîşesazî û Komputerên Mîkro A WORKSTATION is a high-end MICROCOMPUTER designed and used for technical or scientific applications. The intention is that they are used by one person at a time, and are commonly connected to a local area network (LAN) and run multi-user operating systems. The term workstation has also been used by many to refer to a mainframe computer terminal or a PC connected to a network. In the past, workstations had offered higher performance than desktop computers, especially with respect to CPU and graphics, memory capacity and multitasking capability. Workstations are optimized for the visualization and manipulation of different types of complex data such as 3D mechanical design, engineering simulation (such as computational fluid dynamics), animation and rendering of images, mathematical plots…etc. Consoles consist at least of a high resolution display, a keyboard and a mouse, but may also offer multiple displays, graphics tablets, 3D mice (devices for manipulation and navigation of 3D objects and scenes), etc. Workstations are the first segment of the computer market to present advanced accessories and collaboration tools. Catalog for Vandal-Proof IP65/IP67/IP68 Keyboards, Keypads, Pointing Devices, ATM Pinpads, Medical & Military Keyboards and other similar Rugged Computer Peripherals To choose a suitable Industrial Workstation for your project, please go to our industrial computer store by CLICKING HERE. We offer both off-the-shelf as well as CUSTOM DESIGNED AND MANUFACTURED INDUSTRIAL WORKSTATIONS for industrial use. For mission critical applications we design and manufacture your industrial workstations according to your specific needs. We discuss your needs and requirements and provide you feedback and design proposals prior to building your computer system. We select one of a variety of rugged enclosures and determine the right computing horsepower that meets your needs. Industrial workstations can be supplied with active and passive PCI Bus backplanes that can be configured to support your ISA cards. Our spectrum covers from small 2 – 4 slot benchtop systems up to 2U, 4U or higher rackmount systems. We offer NEMA / IP RATED FULLY ENCLOSEDworkstations. Our industrial workstations outperform similar competitors systems in terms of the quality standards they meet, reliability, durability, long term use and are used in a variety of industries including the military, navy, marine, petroleum & gas, industrial processing, medical, pharmaceutical, transportation and logistics, semiconductor manufacturing. They are designed to be used in a wide variety of environmental conditions and industrial applications that require additional protection from dirt, dust, rain, sprayed water and other circumstances where corrosive materials such as salt water or caustic substances can be present. Our heavy-duty, ruggedly-built LCD computers and workstations are an ideal and dependable solution for use in poultry, fish or beef processing facilities where total wash-down with disinfectants occurs repeatedly, or in petrochemical refineries and offshore drilling platforms for oil & natural gas. Our NEMA 4X (IP66) models are gasket sealed and constructed from 316 stainless steel. Each system is engineered and assembled according to a completely sealed design using top quality 316 stainless steel for the outer enclosure and high-tech components inside each rugged PC. They come equipped with industrial grade bright TFT displays and resistive analog industrial touch-screens. Here we list some of the features of our popular industrial workstations: - Water and dust proof, corrosion resistant. Integrated with water proof keyboards - Rugged enclosed workstation, rugged motherboards - NEMA 4 (IP65) or NEMA 4X (IP66) environmental protection - Flexibility and options in mounting. Mounting types such as pedestal, bulkhead…etc. - Direct or KVM cabling to host - Powered by Intel Dual-Core or Atom processors - SATA fast access disk drive or solid state media - Windows or Linux operating systems - Expandability - Extended operational temperatures - Depending on customer preferences, input connectors can be located on the bottom, side or rear. - Models available in 15.0”, 17” & 19.0” - Superior sunlight readability - Integrated purge system for C1D1 applications as well as non-purged C1D2 designs - UL, CE, FC, RoHS, MET compliances Dowload brochure for our DESIGN PARTNERSHIP PROGRAM CLICK Product Finder-Locator Service RÛPERA BERÊ